This actuator is made for in-wall installation and fits into an ISO installation socket. It can control all type of loads up to 1000W.
A special hightlight is the integrated turn off automatic, which can turn the load off optionally after 2 sec., 2-15 min. or 2-8 h. Since it is potential free also low voltage circuits can be attached.

Technical data: 230 Volts, max. 1000W, self learning code.

This actuator can dim light bulbs and high voltage halogen lamps up to 300W. Also for OSRAM Halotronic 12V-transformers. Made for in-wall and on-wall installation.

Technical data: 230 Volts, max. 300W, self learning code, percentage dimmable, leading edge dimmer

This device cannot be used to dim energy saving lamps and LEDs!

The impulse switch triggers the output only for the time the button on the remote control is pressed. This is ideal for example for door openers or other loads which require a current pulse like contactor switched lightning.

Tech. data: 230V, max. 1000W. Supported codes: A-P, 1-16.

This switch is made to control electric blinds, doors, marquees, or beamer screens. It has 2 potential-free outputs and an automatic power off circuit of 2 minutes.

Tech. data: 230V, max. 1000W, self learning code.

 Bargain offer!

This in-wall switch can be supplied with 12 Volts (max. 15A) as well as 24 Volts (max. 7A). So it is perfect for cars and trucks applications, boot, camping, model making or solar plants. Potential free!

Technical data: 12/24 Volts. Supported codes: A-P, 1-16.

This module can be installed behind any onwall switch. From now on you cannot only turn on and off or dim the lightning with the switch but also with your remote control. Can be used with any light bulb and high voltage halogen lamps.

Technical data: 230 Volt, max. 210W, self learning code, percentage dimmable, trailing edge dimmer, Dim. 45 x 41 x 13 mm. Depending on availability the module might come from different manufacturers.

Not for energy saving lamps, low voltage transformers, LEDs as well as alternating switches!

This module can be installed behind any onwall switch. From now on you cannot turn on and off the lightning with the onwall switch but also with your remote control. Can be used with any light bulb and high voltage halogen lamps. Depending on availability the module might come from different manufacturers.

Technical data: 230 Volt, max. 230W, self learning code, Dim. 45 x 41 x 13 mm

Not for energy saving lamps, low voltage transformers, LEDs as well as alternating switches!

Electronic transformer for 12V halogen lamps with integrated dimmer. It can replace any standard transformer. The last used light level is saved.

Technical data: 230 Volt, 12V sec., max. 105W. Supported codes: A-P, 1-16, Dimensions: 125 x 59 x 37 mm.

Not for energy saving lamps and LEDs!

This radio bus bulb socket is used to switch lamps with E27 sockets. Just place it between the socket of the lamp and the bulb itself. From now on the light can be switched on and off wirelessly, for example by the Light-Manager. Standard bulbs as well as energy saving bulbs are supported.

Technical data: 230 Volts, max. 100W, self learning code, elongates bulb for 5.5 cm, diameter 6cm